Rauland Responder 5000 R5KMPR15 15Volt Power supply-Pre-Owned

Rauland Responder 5000 R5KMPR15 15Volt Power supply-Pre-Owned

View Other Rauland Nurse Call REPLACEMENT Parts

View Rauland Nurse Call REPAIR Options

The R5KMPR15provides 15.5V DC power for patient stations, corridor lights, domeless controllers, and all K-Bus accessories. The input is auto-sensing and operates from 106-240V AC. The power supply contains multi-color LEDs to indicate its operational status for quick visual identification.

An input power switch enables quick disconnection from the AC power input. A sealed battery allows the power supply to continue operation if the input power is interrupted with a holdup time of 5 minutes (min) at a typical load; the actual holdup time is dependent on the load. 

The R5KMPR15 mounts in either the NC2828 or 351102 equipment cabinets. It is painted gray to distinguish it from the Responder 5000 36V Power Supply (R5KMPR36).

Features

• Provides 15V DC power for patient stations, corridor lights, domeless controllers, and other K-Bus devices
• Output rated at 4.65 A
• Includes built-in battery backup with On/Off charging switch /span>
• Auto-sensing input voltage range
• LEDs indicate status
• Mounts in NC2828 or 351102 Equipment Cabinets
• Power On/Off switch for ease of installation and service 

Specifications

• Power Required: 106-240V AC, 47-63HZ, 1.75 A
• Size: W: 10.9 cm (4.3”) H: 29.0 cm (11.4”) D: 6.4 cm (2.5”)
• Weight: 1.9 kg (4.3 lbs)
• Housing & Finish: Gray metal enclosure w/ black nomenclature
• Controls/Indicators: One (1) AC On/Off switch; On/Off charging switch; One (1) AC status LED; One (1) DC status LED; One (1) Battery Charge LED; One (1) Battery Reversed LED
• Environmental Parameters: 32˚F (0˚C) to 122˚F (50˚C)
• Relative Humidity: 5 to 95%
• Power Output: 15.5V @ 4.65 A total
• Mounting Requirements: Rauland 351102 Wall Mounting Cabinet or NC2828 Terminal Cabinet
• Terminations: Three (3) pairs of power screw terminals One (1) AC OK signal terminal; One (1) Earth GND terminal One (1) IEC Universal receptacle; One (1) pair fasten 187 clips for battery leads
• Certifications: Designed for compliance to ANSI/UL 1069, IEC 60950, CE, RoHS / WEEE Compliant. Assembled in a U.S. FDA registered facility