Tektone Tek-CARE570 SF572 Pull-Cord Station

Tektone Tek-CARE570 SF572 Pull-Cord Station

Description

The SF572 is a wireless, surface-mountable station thatincludes a Call button, a pull cord, an LED for call indication,and a Reset button. Rounding and Chcek-In functions may alsobe enabled on the SF572. 

 When a call is placed, it annunciates on any master stations,duty stations, staff apps, and monitors installed on the TekCARE system zoned to display the call. The SF572 stations areconfigured using the LS450 Config Tool software. By default,the push button and pull cord place an “Emergency” call. 

 Custom call types can be created and applied using the LS450Config Tool Software. The SF572 may be directly surfacemounted to a non-metallic surface, or mounted using a nonmetallic single-gang backbox or low voltage ring. 

Features

• Call and Reset button
• Optional pull cord (SF574) included
• Reset button supports Rounding and Check-In functions
• Includes screws, anchors, and a wall-mount bracket
• IP65 water resistant
• Long-lasting and replaceable battery
• Low battery indication

Specifications

Dimensions: 4.2"H × 3.4"W × 0.86"D (106 mm × 87 mm × 22 mm)

Battery: BA007 ×2 (CA2477)

Mounting: Surface-mounted; attach back plate to a standard plastic single-gang ring or single-gang box. Do not use metal rings or boxes as it interferes with the wireless signal.

Construction: PC board with quality electronic components mounted on a plastic faceplate

Required Components

NC570 Receiver

NC571 Repeater