Home       Schedule a Call

National Supplier of Nurse Call & Life Safety Systems

Tektone IR421P5 Single Patient Station with DIN jack

SKU
IR421P5
$343.61
Tektone IR421P5 is part of the Tektone Nurse Call System. Please contact us for DISCOUNTED Project Bids, Free Design, and System Support!
OR
  • INFO
  • SPECS
  • RELATED
  • Tektone IR421P5 Single Patient Station with DIN jack

    Description

    The IR421P5 Single Patient Station provides reliable full-duplex, hands-free communication between patient and nurse, plus programmable privacy, paging, and patient priority from the master station. Calling the nurse is accomplished by pressing the call cord button or the nurse button on the pillow speaker. The IR421P5 includes a single-DIN jack, 1/4'' phone jack, two programmable buttons, and a reset button. To remove the call cord or pillow speaker, hold down the reset button for 3 seconds before pulling out the plug. Otherwise, a “cord out” call will be sent to the master station. To reset the call, replace the call cord or pillow speaker plug in the jack. The IR422P5 Dual Patient Station has the same specifications and functions as the IR421P5 but has two DIN jacks, two 1/4" phone jacks for additional cord or isolated dry-contact input, and a reset button.

    Features

    • Control and power over CAT5 cable
    • Fully supervised wiring to the central equipment
    • Supervised Emergency and Code buttons
    • Uses pillow speakers or push-button call cords
    • No dummy plugs needed to prevent "cord out" call
    • Simplified wiring with plug-in connectors
    • 1/4" phone jacks provided for additional cord or isolated normally open dry-contact inputs
    • Half-duplex and full-duplex audio options

    Specifications

    Dimensions : 4.80"H × 7.35"W × 2.5"D

                           122 mm × 187 mm × 64 mm

    Construction: Flame-retardant (UL® 94V-0) plastic

    Speaker: 2.50" × 2.50" (64 mm × 64 mm)

    Connections: Plug-in connectors for peripherals

    Housing: 

    •  RACO 692 (Shallow masonry box).
    •  RACO 697 (Deep masonry box, required when PM modules are installed on station).
    • Steel City #H3BD with Steel City #3GC plaster ring OR equivalent Conduit access for masonry boxes must be through the top.Wiring: Control and power over CAT5 or better cable.

    Required Components 

    Tek-CARE®400 P5+ Nurse Call System 

    NC455CE Master & Station Module 

    NC404TS or NC415AV Master Station Console 

    SF42KLA Pillow speaker or SF401A-series Call Cord