Rath - Avire RP7700DCPGSM Gsm / Att Dcp Lte 4G Cellular

Rath RP7700DCPGSM - 4G LTE Refuge Communications Mobile Wireless Link

Rath - Avire RP7700DCPGSM Gsm / Att Dcp Lte 4G Cellular is a high tech device to communicate and interface with emergency comms systems on a wireless dedicated comms path. This cellular gateway can be coupled with a replacement for traditional copper landlines (POTS) using AT&T's LTE 4G system, which delivers a reliable, code-compliant solution for maintaining elevator phone and emergency call boxes.

This module is designed in such a way as to completely eliminate analog line monthly expenses and maintenance problems. It is contained in a strong surface mount case that is designed with a “plug and play” principle so it can easily be mounted in the facility in question in case the need to rewire the facility does not apply. At worst conditions, it makes the link between the emergency equipment at location and the remote monitoring centre, which is crucial.

What It Does

The RP7700DCPGSM works by converting normal analogue signals from emergency telephones, and transmitting the digitised cellular data via the 4G LTE network.

• Voice & Data Bridge: It gives a standard FXS port (RJ11) to enable standard elevator/emergency phones to call via the cellular network.
• Constant Connectivity Monitoring (CCM): Software on-board periodically checks on heartbeats on the network. Should the signal be broken through a local trouble signal may be activated which can be used for a local annunciator.
• Built-in battery back-up for Fail-Safe Power Management: It will keep it functioning in case of a power failure, enabling Two-Way Voice Communications as specified by codes.
• Signal Optimization: It has its own antenna to receive the strongest signal in mechanical room and areas affected by high architectural interference.

Technical Specs

• Model: RP7700DCPGSM (AT&T LTE 4G / GSM Module)
• Strides encompassed by the AT&T 4G LTE + GSM network.AT&T 4G LTE + GSM network channel للأزواج.
• Power Input: 120 VAC, 10VA
• Battery Backup: Internal 12V 800mAh NiMh battery (upto 4 hrs talk time)
• Hardwiring – includes screw terminals, 1 RJ11 (FXS) connector, serial (RS232) connector, CANBUS connector.
• Operating Temperature: 32°F to 113°F (0°C to 45°C)
• Dimensions: 4.3” H x 8.3” W x 2.6” D
• Compliance: Meets ASME A17.1 (2019/2022), B44, IBC, and NFPA 72 code requirements; FCC registered; UL 62368-1 listed

Key Features & Benefits

• Reducing Analog Line Costs: substantial monthly utility savings due to the cost effectiveness and the need to replace costly POTS lines with a cellular plan.
• Specifically programmed for elevator (escalator) monitoring on the elevator line by ASME A17.1 / B44 to comply with the "trouble signals" requirements of today's building safety codes.
• Rapid Retrofit Capability: It can be quickly installed on any Rath SmartPhone VI elevator phone and Janus elevator phone, and is the best solution for corner offices.
• Superior Signal Penetration: High gain antenna and built-in system scanner to determine optimum antenna placement for maximum penetration.
• Secure Data Pass-Through: It comes with an RS232 connector which can be used for second data logic thus providing more sophisticated data monitoring on a wireless platform.

Common Application

The Rath Avire RP7700DCPGSM is the top-selling vertical vehi transportation and life safety solution for 24 hours/365 days wireless communication. Generally, utilised in:

• Elevator Modernisation: Analogue replacement of elevators in older high-rise buildings.
• Rescue Systems: Stairwell and lobby-level emergency call stations ultra main communication system.
• Remote Campus Call Boxes: Connecting the campus and/or parking lot security phone with the central monitoring—without having to run internal wiring.
• Ensuring redundant, failsafe, communication within critical nurse call and emergency response systems for healthcare facilities.