The HSS400 High-Security Bedside Station is a single bed station that allows both patients and staff to place different call-in priorities, depending on their requirements, to the assigned Console(s). It is specifically designed for nurse call systems used in high-security facilities such as psychiatric wards, correctional institutions or wherever vandalism may be encountered.
Calls are initiated by a patient or staff member using a 1⁄4” call cord or similar device. With the use of the R4KOUT4S Output Driver and DCA200 Domeless Controller, the HSS400 can have its calls visually annunciated on the CLS100 Series High-Security Corridor and Zone lights.
The HSS400 is virtually indestructible. It is protected externally by an 11-gauge brushed stainless steel faceplate. The cancel switch of the station is vandal-proof momentary push-button type. A rugged steel actuator activates a momentary switch whose movement is limited by a mechanical stop to prevent damage caused by attempted vandalism. The speaker/microphone is protected against damage.
The bedside station is connected to its associated corridor light or domeless room controller and is continually supervised for station presence. Through programming, a “Trouble” message can annunciate at the associated console(s) when the station is removed from the system.
Power Required: 15.5V DC @ 10mA
Weight: 2.35 lbs. (1.07 kg)
Size: W: 7.50” (19.10 cm) H: 5.50” (14.00 cm) D: 2.50” (6.40 cm)
Housing and Finish: 11-gauge brushed stainless steel faceplate
Controls: One (1) Call Jack, One (1) Cancel button, One (1) Monitor LED indicator, and One (1) Call-assurance indicator
Terminations: Plug-on connectors
Backbox Options: Standard (3-3/4” to 3-1/2” deep) 3-gang
SKU | HSS400-REF |
---|---|
UPC | 351309475762 |
Condition | Pre-Owned |
Manufacturer | Rauland NC Parts |