The DCV100 is typically located where a corridor light is not needed or desired. The controller provides annunciation at the associated annunciate panel or console of calls originating from the bedside, bath/ emergency, and code stations as well as service requirements and staff registrations. The DCV100 can also be installed in areas where additional room stations are needed such as in a ward environment. Other corridor lights can be programmed to reflect calls placed on patient stations connected to a domeless room controller. The DCV100 supports up to six (6) non-audio call-in stations. Using an associated R4KOUT4R — Relay Output Board, the DCV100 can provide four (4) dry relay contact outputs to drive external devices.
The DCV100 mounts onto a variety of single and dual gang backboxes. The metal housing allows for the controller to sit above ceiling tiles or to be placed into a wall. The DCV100 is continuously supervised for both power and data signals.
Power Required: 15.5V @ 12 mA
Weight: 1.15 lbs. (0.52 kg)
Size: W: 4.25" (10.80 cm) H: 5.50" (13.97 cm) D: 2.80" (7.11 cm)
Housing & Finish: 20 gauge steel, painted primer gray
Controls: K-bus DIP switch address
Terminations: Modular plug-on connectors (power, data, audio)
Backbox Options: Steel City 58371 3/4R, Raco 561, or any other single gang backbox. The mounting hole pattern on the housing allows for North American, South American, and European style single and dual gang backboxes. The metal housing also permits the DCA200 to be located above ceiling tiles or to be placed into a wall.
Certifi cation: UL/C-UL 1069; FCC Part 15 Class A
SKU | DCV100-6REF |
---|---|
UPC | 351309475465 |
Condition | Pre-Owned |
Manufacturer | Rauland NC Parts |