Circuit integrity cables are the first to be certified to UL 2196 while meeting Category 3 channel requirements. These shielded cables are available in 18 AWG 2 pair construction and are capable of transmitting signals at a speed of 10 Mbps. In the event of a fire, these cables will ensure critical voice applications remain operational.
• Emergency communications (i.e. telephones, speakers, etc.)
• Area of Refuge communication devices
• Addressable Class N fire alarm devices
• Critical data communication circuits
• For use in wet locations
• Only UL 2196 listed cable for 2 hour fire-rated circuits
• Unique solution for NFPA Level 2 or 3 requirements
• Supports all 10 Mbps critical data circuits
• Conductors: 18 AWG Solid Bare Copper
• Tape: Flame Retardant Tape
• Insulation: Low Smoke, Zero Halogen Thermoset Fire-RocTM
• Cable Assembly: 2 Pairs, White and Black Conductors
• Drain: 18 AWG Stranded Bare Copper
• Shield: Copper Shield
• Jacket: Red Non-Halogen Flame Retardant Polyolefin
• ANSI/UL 2196 2 Hour Fire-Rating for use in FHIT System 40A
• CAN/ULC-S139 2 Hour Fire-Rating with Hose Stream for use in FHIT7 System 40A
• c(UL)us Listed Type CMR-LS
• UL Listed Type FPLR-LS & CL3R-LS
• CSA Listed FAS105 ST1 FT4
• UL Subject 444 Communications Cable, 300V/105°C Classified
• UL Subject 1424 Power Limited Fire Alarm Circuits; 300V/105°C Classified
• UL Subject 13 Power Limited Circuit Cables; 300V/105°C Classified
• NFPA 70, 72, & 130
• California State Fire Marshal Approved
• RoHS Compliant
• NYC Electrical Advisory Board Approval # 54502, April 2017
SKU | 66120 |
---|---|
UPC | 351309471177 |
Condition | New |
Manufacturer | Rath Communications |