Use these tips when building your system and

You Will Receive A Complete System Quote Instantly!

1. Add at least (1) WNC-SERVER, MV500, or MV200. The Master Consoles receive calls from push button transmitters. 

• WNC-SERVER supports up to 65,000 push button transmitter devices
• MV500 supports up to 65,000 push button transmitter devices
• MV200PLUS supports up to 100 push button transmitter devices

2. Select any combination of push button stations / devices. 

3. If including Neck or Wrist Pendants at least one WNC-WND reset device will be needed.

4. Add wireless repeaters if any Push Button Transmitters or Devices are more than 80 feet from the WNC-SERVER, MV500, or MV200PLUS. (1) Repeater covers approximately 23,000 sq ft. 

We really do not have limitations on the size of area to be covered.  What is important to know is the size of area to be covered as we will place repeaters to extend the range as needed. A single repeater will give an approximate coverage area of 80 feet.  Space the repeaters so that no transmitters, stations, or pendants are further than 80 feet from the closest repeater.  The repeaters listed below offer the same wireless distance coverage. 

• Repeater WNC-RP is powered with standard power supplies
• Repeater WNC-RPSM is powered with a USB port and USB cable.

5. Add Lights as needed. We offer 1, 2, and 3 bulb dome lights.  These lights will require a 50 light or 200 light Dome Light Controller.  

6. Add Pocket Pagers as needed. Pagers will require the SPS5 Paging Transmitter.