Linear Security Systems DX-COKIT Carbon Monoxide Detector Kit SSA00020

Carbon Monoxide Detector Linear Solutions Wireless Supervised Security

The DX-COKIT Supervised Carbon Monoxide Detector Transmitter and Receiver Kit includes a single station DXS-80 carbon monoxide alarm with a built-in supervised transmitter and DXR-702 2-Channel Receiver. This kit is designed with an alarm warning in order to provide protection against carbon monoxide poisoning. The DXS-80 will sound a loud local alarm if carbon monoxide is detected. Digitally coded wireless signals will be sent every 10 seconds by the built-in transmitter to the DXR-702 receiver. The CO alarm will activate the receiver Channel 1 relay. The digital DXS transmitters are pre-coded in the factory so that no field coding is required. The DXR-702 receiver can be powered from a 11-17 VDC or 12-16 VAC power source. A nine-inch wire antenna fastens into the receiver's antenna connector. In order to get better radio range, a remote antenna (Model EXA-1000) can be attached to the receiver.

The DXS-80 includes a 3-volt lithium battery that has a life expectancy of up to 6 years. A low chirp will sound every 45 seconds when the battery becomes low, and a signal will be sent to the receiver as a warning as well which activates the receiver’s Channel 2 relay. After the battery runs out, the carbon monoxide detector element should be replaced.

NOTE: The DX-COKIT is not for use in UL Listed applications.

DXS-80 CO Detector Features

• RF frequency: 315 MHz
• 5.375" W x 5.375" H x 2" D
• Built-in 85 nBA sounder
• Electrochemical

DXR-702 Receiver Features

• Supports up to 32 transmitters
• RF activity indicator
• 2 channels
• 2 form "C" relay outputs
• Current consumption: 25 mA standby, 90 mA operating @ 12 VDC
• RF frequency: 315 MHz
• 5.5" W x 4.0" H x 1.25" D