Linear GoControl Garage Door Controller Z-Wave Plus S2 Security, OTA

Linear GoControl Garage Door Controller Z-Wave Plus S2 Security, OTA

Key Features:

• Power: 120VAC, 50/60 Hz
• Garage door position sensor frequency: 345 MHz
• Z-Wave Frequency: 908.42 MHz
• Controller - W x H x D (Inches) - 6.94 x 1.38 x 5.0

The GD00Z-8-GC Garage Door Opener Remote Controller opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. It is compatible with virtually any automatic garage door opener connected to a sectional garage door. Installers only need to ‘pair’ the unit into the Gateway, mount the unit, connect two wires, and plug it in. The GD00Z provides both audible and visual warnings prior to remotely-activated door movement, allowing it to meet UL 325-2010 safety requirements. The GD00Z ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports ‘open’ or ‘closed’ status to the controller.

 The Z-Wave Garage Door Opener Remote Controller accessory integrates with other Linear Z-Wave enabled products, and can also act as a wireless repeater to insure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

SPECIFICATIONS:

Range: Up to 130 feet between the wireless controller and/or the closest Z-Wave receiver module

Scene: Command class

Controller: W x H x D (Inches): 6.94 x 1.38 x 5.0

Tilt sensor: W x H x D (Inches): 1.69 x 0.88 x 1.19

Power Supply: Input: 120 VAC, 0.35 A Output: 12 VDC, 1 A

Operating Temperature: -4°—122° F (-20°—50° C)

Audible Alarm: 45 db @ 10 feet

Communications:  Z-Wave (908.4 MHz)

Mounting:   Screws and anchors to the ceiling, or bracket to the opener’s hanging hardware