Linear 2GIG-RPTR1E-345 Wireless Repeater

Linear 2GIG-RPTR1E-345 Wireless Repeater

The 2GIG Wireless Indoor Repeater (2GIG‐RPTR1‐345) is a remotely powered wireless indoor repeater. The repeater is a peripheral device that communicates with the 2GIG Panel using a proprietary 345 MHz transmission protocol. The repeater receives and recognizes messages from other 345 MHz devices that are unable to directly communicate with the system, and “repeats” those messages to extend the range of these devices. 

The repeater will typically be installed at the mid‐point between the panel and the wireless devices being repeated. When a transmission from a device is repeated, the repeater adds a bit to the message to indicate to the system that the message is not coming directly from the device. The repeater will not repeat already repeated messages.

2GIG-RPTR1E-345 Specification:

• Overall Size: 102 X 76 X 46 mm (4.0” X 3.0” X 1.8”)
• Material: High‐impact ABS plastic
• Color: White
• Weight (without battery): 125 g (4.4 oz.)
• Installation Type: Wall mounted
• Operating Frequency: 345 MHz
• Operating Temperature: Limits ‐10° C to 55° C (14° F to 131 ° F)
• Relative Humidity: 5 to 85% non‐condensing
• Power Type: Remotely powered by AC adapter, with internal battery backup
• AC Adapter Nominal Input Voltage: 100–240 VAC 50/60 Hz
• AC Adapter Nominal Output Voltage: 14 VDC
• Maximum Power Consumption: 3 W
• Idle Current: 40mA
• Operating Current (repeating): 75mA
• Storage Device Capacity: 800 mAh (1) 3.7V 800 mAh 14500 Type Li‐ion battery (not to be replaced)

We offer a complete range of Linear access control and security solutions, including full access control systems, keypads, proximity readers, access credentials, automation radio controls, garage door openers, gate operators, and more. Whether you need a new system or replacement parts, we provide the full line of Linear products to meet your security and access control needs.

View Complete Linear Product Line