Dukane 6000 ProCare Staff/Duty Station with Presence 4A2396A

Dukane 6000 ProCare Staff/Duty Station with Presence 4A2396A

View Dukane Nurse Call REPAIR Options

Placing a Priority Call 

Press the stationís CALL, CODE BLUE, or STAFF EMERG button to place a programmed priority, code blue, or staff emergency call from a patient or staff/duty station. 

When you do, this happens: 

• The stationís CALL LED illuminates to confirm call placement.
• The associated corridor light illuminates and flashes at a designated rate. 
• The call appears at the base master and at the video display (if present).
• A tone sounds at the station and at the base master.
• A tone sounds at any station where the system monitor function is active (default) or any staff/duty station where presence is registered. 
• If presence is registered, the corresponding staff level and SYSTEM MONITOR LEDs flash

Canceling a Priority Call

Press the stationís CANCEL button to cancel a code blue, staff emergency, or programmed priority call placed from a patient or staff/duty station. 

When you do, this happens:

• The stationís CALL LED extinguished.
• The associated corridor light extinguishes. ï The tone ceases at the base master.
• The call disappears from the base master display and the video display (if present).
• The call disappears from stations where the system monitor function is active or at staff/duty stations where presence is registered.

Note: A patient priority or patient emergency call can also be canceled by registering any level of presence in the room that placed the call. However, code blue, lavatory, and staff emergency calls can only be canceled at the station that placed the call, by pressing CANCEL

Canceling a Reminder 

Press the stationís CANCEL button to cancel a call placed on the reminder.OR  
Register staff presence in the room.The registered presence must be the same level as the set reminder.)

When you do, this happens:

• The stationís CALL LED extinguished.
• The associated corridor light extinguishes. 
• Note: When presence is registered, the section of the corridor light that corresponds to the registered presence level stops flashing and steadily illuminates.
• The reminder recall disappears from the base master display and the video display (if present).
• The reminder recall disappears from stations where the system monitor function is active or at staff/duty stations where presence is registered.