Dukane 2000 Nurse Call 4A3183 Special Purpose Single Patient Station Refurbished

Dukane 2000 Nurse Call 4A3183 Special Purpose Single Patient Station Refurbished  

This patient station is normally used in conjunction with a bed safety rail communication system. A pillow speaker can be substituted for the bed rail communication system. The patient can place a normal call or emergency call to the master station through the bed rail system or through the pillow speaker. All calls made from this station are indicated at the master station, at the duty stations, and at the corresponding corridor and zone lights. A call is canceled by pressing the CANCEL touchpad at the patient station, or by answering the call at the master station and communicating with the patient through the bed communications panel. 

Removal of the bed communications cord is received as an emergency call at the master station. This call is canceled by replacing the bed communications cord, pillow speaker, or dummy plug (supplied by the bed manufacturer) and pressing the CANCEL touchpad. While the cord is unplugged, two-way communication automatically reverts to the station speaker/microphone. 

1 Speaker/Microphone 

The speaker/microphone allows two-way voice communications between a person in the room and the attendant at the associated master station when the bed rail communications system is unplugged. The hands-free operation provides direct interactive communication through the station panel. 

2 Amber Call Assurance LED 

The amber LED lights each time a call is placed from this station and remains lit until the call is answered from the master station or canceled at this patient station. Call priority is indicated by either a steady illumination of the amber LED for normal calls or a rapidly flashing LED for emergency calls. The LED flashes slowly if the station is placed on the reminder.

3. CANCEL Touchpad 

Press this touchpad to cancel any pending call placed from this station or to remove the station from reminder status. 

4. Red Privacy LED 

The red privacy LED lights when this station is in the intercommunication mode or when it is being monitored by a master station