Cornell E-101/CB - Code Blue Push Button Station with Call Placed Light

Description:

E-101 Push Button Emergency Station features a satin finish stainless steel faceplate with silk-screened designations. Stations can be used on single or dual status systems. They may be flush mounted on a standard outlet box with single gang rings, or surface mounted on Wiremold 5748 or equal with a depth requirement of 1 ¾ “. Incandescent lamps not acceptable. Field wiring terminations are with screw terminals for maximum 16-gauge wire.

Operation:

A touch of the push button type switch on the E-101 Emergency station activated a call for help, verified by a red LED indicator. Calls can be cancelled by pushing the button again.

Mounting:

The satin finish stainless steel faceplate with silk-screened designations may be flush mounted on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold 5748 or equivalent.

Engineering Specifications:

The contractor shall furnish and install CORNELL Push Button Emergency Stations as indicated on the plans. Faceplates shall be satin finish stainless steel with silk-screened designations. Calls in progress (E-101) are indicated by a red LED. Calls in progress (E-103/E-113) are indicated by mechanical flag drop. Calls may be cancelled by pushing the button again. Stations shall be mounted on standard outlet boxes with single-gang rings or Wiremold 5748 or equal.

Technical Information:

• Power Requirements: 24VDC
• Operating Environment: 50-120°F Indoor Non-condensing
• Physical Faceplate Dimensions: 4 ½ ”H x 2 ¾ ”W (Standard 1 Gang)  
• Mounting: Single-Gang back box with 1¾” minimum depth
• Wiring: #22 AWG Minimum, #16 AWG Maximum