Cornell A-1806D Remote Control Keypad

Operation:

Model A-1806D (Arm, Disarm & Exit Delay) Enter the 1 to 6-digit access code. The yellow LED will flash 3 times. Press the * key to disarm the zone, the # key to arm the zone, or the 0 key to initiate time delay.

Mounting:

The satin finishes stainless steel faceplate with silk-screened designations may be flush mounted on a standard outlet box with a dual-gang plaster ring.

Engineering Specifications:

The contractor shall furnish and install a CORNELL remote zone control keypad. The faceplate shall be a standard two-gang stainless steel plate. The keypad shall be a micro-controller based. The microcontroller shall have a built-in watchdog timer. LED indicators (red, green, yellow) shall be utilized for long life; incandescent lamps are not acceptable. The unit shall be user programmable entirely from the keypad. Unit shall accept any 1-6 digit access code. Programming shall be preserved during power failure. Unit shall be operated on 12 VDC. Power consumption shall be less than 20 mA.

Technical Information:

• Power Requirements: 12VDC
• Operating Environment: 50-120°F Indoor Non-condensing
• Mounting: Surface, Flush, or Desktop
• Wiring: #22 AWG Minimum