Cornell A-1801 Remote Zone cntrl w/timer & kyswtch

Cornell A-1801 Remote Zone cntrl w/timer & kyswtch

Description:

The remote zone control with time delay allows for a keyed access zone control of individual doors with a time delay so that the door stays armed after a predetermined amount of time has elapsed.

Operation:

This remote zone control allows for a keyed access zone control of individual doors with a time delay, allowing the door to stay armed after a predetermined amount of time has lapsed. The station includes: 

· A key switch used to activate the disarm function. · Time adjustable from a 5 to 60 second time delay, · after which the door will arm itself again. · One steady lighted LED to indicate the zone is armed, a flashing LED when the zone is in alarm and the LED is off when the door is disarmed. · An optional tone device

Mounting:

The satin finish stainless steel faceplate with silk-screened designations may be flush mounted on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold 5748 or equivalent.

Engineering Specifications:

The contractor shall install CORNELL A-1801 Zone Control Stations with Time Delay as indicated on the plans for use with the Series A-1000 Door Monitor System. Each station shall provide alarm-free access to authorized individuals using a key for temporary disarming. Automatic reset shall follow a preset time delay. Each single-gang stainless steel station suitable for (flush) or (surface) mounting shall feature a key switch for disarming and a red LED to indicate armed status when lit. Power shall be supplied via the Series A-1000 master panel at 12 volts DC, regulated. Current is 17mA when the zone is armed.