Linear Wireless Security TX-91 2-button 3-channel Transmitter SST00055

Handheld Transmitter Linear Solutions Wireless Supervised Security

The Model TX-91 Supervised 2-Button, 3-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with Linear’s SX Format receivers. By pressing a button located on the transmitter, a digitally coded wireless signal will be sent to the receiver with which it is paired. The button must be pressed for no less than two seconds in order to insure the full signal has been sent. The top button can be hidden with the top button cover supplied. Also included with the TX-91 transmitter are removable pocket clip and belt clip. Either can be attached to the back of the transmitter allowing the unit to be clipped to shirt pocket or slid onto a belt.

The TX-91 is a two-button, three-code transmitter. Pressing the round button on the transmitter’s front sends the first code. Pressing the small button on the transmitter’s top sends the second code. Pressing both buttons at the same time sends the third code.

The digital SX transmitters are pre-coded in the factory so that no field coding is required, and the SX code format is equipped with more than 16 million possible codes. Powering each T-90D transmitter are two self-sustaining type 2032 3-volt batteries. When the battery voltage is low, a low battery report will be sent to the receiver with which the transmitter it is paired. The TX-91 is supervised for low battery and will send a status report every hour.

Handheld Transmitter Features

• RF frequency: 303.875 MHz
• 1.6" W x 4.2" H x 0.8" D